ABIS - DocteurPC67.com Dépannage informatique à domicile - Strasbourg - CUS - 67

DOCTEUR PC67

lundi 29 septembre 2008

vendredi 26 septembre 2008

Un pilote suisse traverse la Manche avec une aile à réaction

[26/09 - 15h16]


Le pilote suisse Yves Rossy, vérifie son aile de carbone, le 25 septembre 2008 à Marck près de Calais

Le pilote suisse Yves Rossy, dit "FusionMan", a réussi vendredi sa tentative de vol entre Calais (France) et Douvres (Angleterre) avec une aile en carbone munie de quatre réacteurs fixée sur son dos, a constaté un journaliste de l'AFP.

Largué d'un petit avion au-dessus de Calais, "FusionMan" a couvert les 35 km en une dizaine de minutes, avant d'atterrir dans un champ, côté anglais, après avoir déployé un parachute.

Yves Rossi, 49 ans, avait dû renoncer à deux reprises mercredi et jeudi à sa tentative, en raison des conditions météorologiques.

Ancien pilote militaire (il compte plus de 1.000 heures de vol sur Mirage III), actuellement pilote de ligne, il était devenu en 2004 le premier homme à voler avec une aile individuelle munie de réacteurs.

Sa nouvelle aile, d'une envergure de trois mètres, ne permet de voler qu'une dizaine de minutes, compte tenu de la petite taille du réservoir de kérosène (30 litres). Elle peut permettre des pointes à 300 km/h.

Amateur de sensations fortes, il a plus de 1.000 sauts en parachute, skysurf et autres prototypes, à son actif.

IMPORTANT - pour tous les pocesseurs de Multiplex, EVO ou COCKPIT SX

Source : site de multiplex, : http://www.multiplex-rc.de/cms/vorschau/up...info_080910.pdf

---------------------------------------

Cher client, chère cliente,
Depuis 50 ans, la marque MULTIPLEX est associée à des radiocommandes innovatrices de grande qualité pour les modélistes. Pour nous, la qualité et la sécurité du fonctionnement ont une place primordiale.
Dans le cadre de notre contrôle qualité nous avons constaté sur certains émetteurs de la gamme « Royal evo » et « COCKPIT SX » que dans le pire des cas, des pannes peuvent survenir en raison de la qualité inégale de certains composants.
Ceci peut entraîner un arrêt d´émission de la radiocommande et par c..nséquent, une perte de contrôle sur le modèle.
Les émetteurs concernés sont ceux de la gamme « ROYALevo » et « COCKPIT SX », qui ont été livrés ou achetés entre le 1er janvier 2007 et fin mai 2008.
Ne sont pas concernées les radiocommandes livrées depuis la fin mai 2008. Celles-ci portent un marquage « MPX 08/05 » (année/mois).
• Pour des raisons de sécurité, nous vous prions de bien vouloir nous retourner ces émetteurs au plus vite et de ne pas utiliser ceux-ci tant que vérification n´aura pas été faite.
Veuillez indiquer sur votre envoi « Rappel ROYALevo/COCKPIT SX » , pour que nous puissions identifier les émetteurs dès leur arrivée et les traiter prioritairement.

Adresse d'expédition :

MULTIPLEX Modellsport GmbH & Co.KG
Rappel ROYALevo/COCKPIT SX
Westliche Gewerbestr. 1
75015 Bretten-Gölshausen
Allemagne

Pas d'expédition en port dû, SVP.
Merci de votre compréhension pour cette mesure préventive.
En compensation des désagréments occasionnés, nous effectuerons gratuitement une révision générale, que nous recommandons de faire tous les 2 ans sur les radios en général (valeur : environ 40,- €).
Si vous avez des questions, merci de les adresser par email à : revision@multiplexrc.de
Meilleures salutations.

MULTIPLEX Modellsport GmbH & Co. KG
Dieter Wörner
Gérant


Pour info, un nouveau SAV multiplex est ouvert dans le 57
Jean-Marie Messe
BP 12
Bât. at home, Etage nr. 3
Tel.: 03 87 94 62 58
6, rue Usson du Poitou
F-57730 Folschwiller
Email: sav-messe@wanadoo.fr

Une lipo dans ma radio....


ca se passe ici... lipo outrage

bon c'est pas donné qd meme...

j'en ai trouvé 2 autres ici 1c et la 3c qui a l'air mieux...

mais bon laquelle choisir ???

SU-35 RC High Alpha Gyro Testing (4of4)

jeudi 25 septembre 2008

Woot la bannière !

GG Adry !
Franchement très réussies notre nouvelle bannière, bravo !

Des vidéo NET !!! :-) Deshaker

Bon, pour avoir de belles vidéos il existe un filtre gratuit DESHAKER a telecharger pour VirtualDUB (aussi gratuit).

Le but de ce filtre est d'analyser une scène prise caméra qui bouge et de tenter de stabiliser l'image pour ne plus avoir le mal de mer. Sur les petites caméras on trouve un stabilisateur d'image basé sur ce principe mais trop souvent on oublie de l'enclencher. DESHAKER va donc essayer de reparer cela.

DESHAKER est un logiciel extérieur ( plug-in) qu'on place dans le sous-répertoire .\VirtualDubMod\plugins et que l'on va sélectionner manuellement dans les menus de Virtual dub mod à la section filtres Vidéo.

Plus d'info et sources ici : http://www.commentcamarche.net/forum/affich-2099959-virtualdub-le-filtre-deshaker

Features:

  • Stabilizes horizontal/vertical panning, rotation and zooming.

  • Works in 2 passes for optimal simulated camera motion.

  • Can use previous and future frames to fill in "black areas" caused by the stabilizing.

  • Optional motion vector video output during first pass.

  • Lots of settings for the advanced user.

  • Human guidance is possible on a frame per frame basis.

jeudi 18 septembre 2008

Nouvelle tuerie en salle ? 4/3B

Les videos sont prometteuses, un très joli jouet, mais pas forcément pour débutant...

http://www.ehirobo.com/shop/product_info.php?cPath=82_90&products_id=5953
avec le code ehirobo, vous le payez 10$ de moins

Voici des videos :
http://fr.youtube.com/watch?v=zRytJHTBnYI
http://fr.youtube.com/watch?v=3b1QLqvDlwk&feature=related
http://fr.youtube.com/watch?v=H6-WH_1N4Tw&feature=related

Pas à dire, ça marche du tonnerre le bazar ^^ et dans la valoche complète, c'est craquant ^^

mardi 16 septembre 2008

Alan Szabo n'existe pas !!!! >>> Helicoptere Autonome robot !!! - Demo 3D -Stanford

plus d'infos ici : http://heli.stanford.edu/

j'ai encore du mal a y croire...


Stanford Autonomous Helicopter performing an aerobatic airshow under computer control.

Visit http://heli.stanford.edu for more.



dimanche 14 septembre 2008

vendredi 12 septembre 2008

Bientot un Trex 250.... et smj 200-180





The T-Rex 250 is now being tested. We expect its release very soon.
No firm date is available yet, but an announcement will be made in the weeks to come.

T-Rex 250
Picture courtesy of thetrexforums.com
http://www.bertrc.com/archives/76

plus de photo et infos ici : http://www.thetrexforums.com/?board=143.0

une video :
T-Rex 250 video - 01 - Test Flight - Car Park

Pilot: Alan Szabo Jr





T-Rex 250 video - 01 - Test Flight - In The Office - Short and sweet. Smiley

Pilot: Jason Krause

pour le smj 200 c'est ici : http://forum.heli4.com/index.php?showtopic=12134

Un lipo saver maison...

Les differents modes pour les radios



jeudi 11 septembre 2008

Comparatif chargeurs lipo...

+-----------------------------------+
| KGLFY's Balance Charger Summary |
| 27 Apr 2008 |
+-----------------------------------+

Integrated Balance Chargers
===========================
These offer simplicity and convenience with the balancer and charger combined
in the same case. Simpler, more convenient, take up less bench space and
easier to transport.

--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
Brand Model Chemistry Balancer Input Output Price (USD) Notes
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
FMA Cellpro4S LiXx only 2s-4s dc 50W/4A $75 Excellent, simple, hugely popular, great value
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
Bantam eStation BC6 multi 2s-6s ac/dc 50W/5A $170 Proven high quality. Integrated ac/dc power supply is great
Hyperion EOS0606iAD multi 2s-6s ac/dc 50W/6A $150 Integrated ac/dc supply but not as good as the BC6
MegaPower 860DS multi 2s-6s ac/dc 50W/6A $110 Appears to be the same as the Hyperion 0606iAD
TP TP610 multi 2s-6s dc 80W/10A $130 New model from respected TP brand
KongPower 100W6 multi 2s-6s dc 100W/5A $150 New model based on the MaxproX6, likely to be just as good
Maxpro X6 multi 2s-6s dc 100W/5A $140 New brand, good user comments so far
iCharger 106B multi 2s-6s dc 180W/10A $100 New brand, good spec.s, good feedback so far
Bantam BC610 multi 2s-6s dc 200W/10A $180 Same great charger as the BC6 but 200W/10A (dc input only)
Hyperion EOS0610iNET multi 2s-6s dc 250W/10A $170 Most bang for buck in terms of features+output power
Hyperion EOS0610iDUO multi 2s-6s x 2 dc 180W/10A each $270 Very handy if you discharge packs in pairs
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
Bantam eStation BC8 multi 2s-8s dc 150W/7A $270 Proven high quality
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
Chargery 1010B multi 2s-10s dc 200W/10A $240 New brand, good spec.s, good feedback so far
iCharger 1010B multi 2s-10s dc 200W/10A $180 New brand, good spec.s, good feedback so far
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
FMA Cellpro10S LiXx only 2s-5s x 2 dc 200W/10A $190 Not independent dual port. 1A balancer is a strength.
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------
Graupner Ultra DUO 50 multi 2x-7s x 2 ac/dc 360W/10A $530 Very impressive beast, but expensive. Integrated AC power supply
for up to 120W max output power, else run it off DC to get 180W/10A
per port or 250W/10A on a single port. Appears to be two independent
channels, each with its own display and controls.
--------- ------------ -------------- --------- ----- ------------- ----------- --------------------------------------------



Non-integrated charger+balancer combos
======================================
This is the older style where the balancer is an add-on accessory to the charger.
Less convenient since it means more boxes, more cables, more things to configure,
store and transport.

--------- -------------- -------------- ------------------- ----- ------------- ----------- --------------------------------------------
Brand Model Chemistry Balancer Input Output Price (USD) Notes
--------- -------------- -------------- ------------------- ----- ------------- ----------- --------------------------------------------
TME Xtrema LiXx BAL+BIM 2s-6s dc 150W/8A $265 Includes power meter functions. Complex and expensive
2 x BAL+BIM 2s-12s dc 150W/8A $360 Includes power meter functions. Complex and expensive
TP 1010C multi 210V 2s-10s dc 220W/10A $300 Top performer, hugely popular in US
Hyperion EOS1210i multi 2 x LBA10 2s-12s dc 180W/10A $240 Good value
Bantam eStation 902 multi 2 x PB6 2s-12s dc 200W/9.9A $400 Proven high quality
MEGA POWER Infinity 960SR multi 1 x LCB12 2s-12s dc 180W/10A $200 Good value, great LCD, 2nd NiXx-only port to
charge your Tx in parallel with your flight battery
--------- -------------- -------------- ------------------- ----- ------------- ----------- --------------------------------------------

Notes
=====
1) "multi" means at least: NiCd/NiMH/Pb/LiPo/LiFe
2) "LiXx only" means at least: LiPo/LiFe
And this comparison of some 6S chargers:
Quote:
Bantam BC6 vs MaxproX6/KP100W6 vs EOS0606iAD/MP860DS vs TP610 vs iCharger 106B
kgfly, 28 Apr 2008

Quality/reliability
The BC6 is the oldest of the group and has an excellent track record for simplicity, performance, reliability and quality. It has many features. The rest are too new to know yet although I have not seen any bad comments about quality or performance issues for any of the newer chargers.

Input power:
BC6 and 0606iAD/MP860DS have integrated ac/dc power supplies which is very convenient and saves the cost of a separate DC power supply.

X6/610C/106B require an external DC power supply of at least 125W/100W/230W respectively.

Output power:
BC6 = 50W/5A, 0606iAD/MP860DS = 50W/6A, TP610C = 80W/10A, X6 = 100W/5A, iC106B = 180W/10A

If you are looking for higher power, the 100W/5A rating of the X6 is better for 5s/6s whereas the 80W/10A of the 610c is better for 4s and below but the 180W/10A of the iC106 eclipses them both. The following table reveals the relative utility of these different output power ratings.
Code:
Charger Output Current Estimates v1.1
======================================

LiPo CC charge voltage 3.75
LiFe CC charge voltage 3.4

Charger output rating (max Watts and max Amps)
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
LiPo 50 100 150 80 180 200 220 250 300
no. of cells 5 5 7 10 10 10 10 10 10
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
2 5.0 5.0 7.0 10.0 10.0 10.0 10.0 10.0 10.0
3 4.4 5.0 7.0 7.1 10.0 10.0 10.0 10.0 10.0
4 3.3 5.0 7.0 5.3 10.0 10.0 10.0 10.0 10.0
5 2.7 5.0 7.0 4.3 9.6 10.0 10.0 10.0 10.0
6 2.2 4.4 6.7 3.6 8.0 8.9 9.8 10.0 10.0
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
7 1.9 3.8 5.7 3.0 6.9 7.6 8.4 9.5 10.0
8 1.7 3.3 5.0 2.7 6.0 6.7 7.3 8.3 10.0
9 1.5 3.0 4.4 2.4 5.3 5.9 6.5 7.4 8.9
10 1.3 2.7 4.0 2.1 4.8 5.3 5.9 6.7 8.0
11 1.2 2.4 3.6 1.9 4.4 4.8 5.3 6.1 7.3
12 1.1 2.2 3.3 1.9 4.0 4.4 4.9 5.6 6.7
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----


Charger output rating (max Watts and max Amps)
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
LiFe 50 100 150 80 180 200 220 250 300
no. of cells 5 5 7 10 10 10 10 10 10
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
2 5.0 5.0 7.0 10.0 10.0 10.0 10.0 10.0 10.0
3 4.9 5.0 7.0 7.8 10.0 10.0 10.0 10.0 10.0
4 3.7 5.0 7.0 5.9 10.0 10.0 10.0 10.0 10.0
5 2.9 5.0 7.0 4.7 10.0 10.0 10.0 10.0 10.0
6 2.5 4.9 7.0 3.9 8.8 9.8 10.0 10.0 10.0
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
7 2.1 4.2 6.3 3.4 7.6 8.4 9.2 10.0 10.0
8 1.8 3.7 5.5 2.9 6.6 7.4 8.1 9.2 10.0
9 1.6 3.3 4.9 2.6 5.9 6.5 7.2 8.2 9.8
10 1.5 2.9 4.4 2.4 5.3 5.9 6.5 7.4 8.8
11 1.3 2.7 4.0 2.1 4.8 5.3 5.9 6.7 8.0
12 1.2 2.5 3.7 2.0 4.4 4.9 5.4 6.1 7.4
------------ ---- ---- ---- ---- ---- ---- ---- ---- ----
LCD:
BC6, Maxpro, iC106B = very clear from all angles
0606i (assuming it is the same as 0610i) = poor contrast and hard to read from off-perpendicular

Ease of learning/use
Of the ones I have tried, the BC6 and MaxproX6 are both very easy to learn and to use. The Hyperion is slightly harder to learn/remember but if it is your only charger you will get used to it quickly. I don't yet have hands-on experience with the TP610C or iC106B.

The BC6 lets you turn off the various beeps and tones which is a feature I really like and is missing from the Maxpro. It is present on the iC106B but not sure about beep/tone control on the others.

Feature summaries
FMA CellPro4S (~$75)
- Requires DC power
- LiXx only: LiPo/LiFe(aka A123)
- 2S to 4S integrated balance charger
- 50W/4A output (3s @ 4A, 4s @ 3A)
- Normal, Fast and Storage LiPo cycles
- No discharge feature
- optional PC interface (logging only)
- optional balance plug adapters

Bantam eStation BC6 (~$150)
- ac/dc input
- Full multichemsitry LiXx/NiXx/Pb
- 2s-6s integrated balance charger
- 50W/5A output
- Balance current 300mA
- Normal, Fast, Balance and Storage LiXx cycles
- Discharge features (7W)
- 5 memories
- optional temperature probe
- optional PC interface (logging only)
- wide range of balance plug adapters

Hyperion 0606iAD (~$140)
Mega Power Poseidon-860DS (~$110)
- ac/dc input
- Full multichemsitry LiXx/NiXx/Pb
- 2s-6s integrated balance charger
- 50W/6A output
- Balance current 300mA
- Normal, Balance LiXx cycles (NO Storage feature)
- Discharge features (5W)
- NO memories
- NO PC interface
- NO temperature probe
- wide range of balance plug adapters

ThunderPower 610C (~$130)
- Requires DC power
- Full multichemsitry LiXx/NiXx/Pb
- Integrated 2S-6S balancer
- 80W/10A output
- Balance current ???mA
- Normal(with/without balancing) and Storage LiXx cycles
- Discharge features (7W)
- 25 memories
- ?? PC interface ??
- ?? temperature probe ??
- TP/FP and JST-XH balance port adapter

Maxpro X6 (~$140)
KongPower 100W6 (~$130)
- Requires DC power
- Full multichemsitry LiXx/NiXx/Pb
- 2s-6s integrated balance charger
- 100W/5A output
- Balance current 400mA
- Normal, Fast, Balance and Storage LiXx cycles
- Discharge features (12W)
- No memories
- included temperature probe
- included PC interface (logging and firmware upgrades)
- some balance plug adapters (JST-XH, TP/FP)

iCharger 106B (~$100)
- Requires DC power
- Full multichemsitry LiXx/NiXx/Pb
- 2s-6s integrated balance charger
- 180W/10A output
- Balance current 300mA
- Normal, Fast, Slow, Balance and Storage LiXx cycles
- Discharge features (20W)
- 10 memories
- optional temperature probe
- no PC interface
- some balance plug adapters


Conclusion
If you want the convenience of an integrated ac/dc power supply then the BC6 is the top offering. The extra features, simpler use model and better LCD (at a guess) more than make up for the small price difference from the 0606iAD. The emergence of the MP 860DS, which appears to be the same as the 0606iAD but at a bargain price makes it the value leader in this ac/dc group.


If you want more than 50W output but don't want to spend more than $150 then the iC106B is the clear value leader. On features and performance it competes against other high-power chargers like the BC6-10 and EOS0610i but on price it is down in this group. A new model from a new brand, it is a bit of an unknown quantity, but initial user feedback is positive.

Otherwise it is a toss up between the MaxproX6/KP100W6 and the TP610. Both offer good value in terms of features and power. The ability for the user to install firmware updates on the Maxpro is very appealing . In most cases in the US though, it is probably easier to get backup and support for the TP610C and it is bound to be popular.

http://www.helifreak.com/showthread.php?t=74722

Anthony à Benfeld 2007

Chapo !